Available in Q1 2027 For more information, get in touch

Radar Level Sensor

RS-60

Tank level. From the outside.

Measures through the wall of plastic tanks with 60 GHz radar. For boats, motorhomes, vehicles and storage tanks.

  • No drilling
  • Nothing in the liquid
  • 12 and 24 V

How it works

Measures through
the tank wall.

The RS-60 sits on top of the tank and measures the distance to the liquid every second, straight through the plastic. The LieLink app turns that into litres or a percentage for your tank shape.

≈ 0 mm
no blind zone: it reads right up to the top
up to 300 cm
tank height
up to 10 mm
plastic or GRP wall

Take a closer look.

RS-60 from the front, at an angle RS-60 seen from the side, with the QR label Top of the RS-60 with label and status LED

Float, tube or radar

What goes into your tank?
Nothing.

Float sender

A hole in the tank and an arm in the liquid. It wears, and it can stick.

Tube sender

A hole in the tank and a tube in the liquid that gets dirty. Cut to the height of the tank.

RS-60

Stuck on top. Nothing in the tank, nothing that wears. One size for every tank up to 300 cm.

FloatTubeRS-60
No hole in the tanknonoyes
Nothing in the liquidnonoyes
No moving partsnoyesyes
No fouling or corrosionnonoyes
One size for every tank heightnonoyes
SAE 5 flange adapter, exploded above a steel tank

Metal tanks

SAE 5 flange adapter.

Radar does not see through steel. The adapter fits the standard 5-hole flange of an existing sender opening, sealed with an O-ring.

Optional accessory.

Four versions

Four ways
to connect.

LieLink app

Any tank shape.
Even your own.

Pick a shape or draw your tank in the LieLink app, and the height becomes litres for exactly that tank.

Coming soon to the App Store and Google Play

For iPhone and Android.

LieLink: searching for a sensor LieLink: choosing the tank shape LieLink: drawing a custom tank LieLink: sensor detail with level and outputs

Tech specs

RS-60 at a glance.

60 GHz
FMCW radar, contactless
up to 300 cm
tank height
± 2 %
accuracy
1 Hz
a new reading every second
Ø 63 × 26 mm
compact, rugged housing
8–32 V
DC supply
≈ 20 mA
current draw at 12 V
−20 … +70 °C
operating temperature

Fresh, grey and black water, diesel and petrol. 3-year warranty. All specifications are in the datasheet.

Questions

Good
to know.

Your tank

Plastic, fibreglass, steel: what can it see through?

Plastic (PE, PP, PVC) and fibreglass (GRP), with a top wall of up to 10 mm. Not metal: on a steel or aluminium tank the RS-60 sits on the SAE 5 flange adapter, in the 5-hole opening where the old sender was.

How big may the tank be?

Up to 300 cm from the bottom to the top wall. On top you need a flat area of at least Ø 63 mm for the sensor.

My tank is not a neat box.

For the litres that does not matter. In the LieLink app you pick the shape (rectangle, cylinder, V-shape, keel and more) or draw your own. For a really odd tank you enter up to 32 calibration points.

Fitting and wiring

How do I find the right spot?

Shine a torch into the tank first. The spot is on top, straight above the deepest point, with nothing in between: no pipe, baffle, filler neck or old sender underneath. Stick the RS-60 on there, flat and level.

The old float sender is still in there.

Leave it. Disconnect its wires and put the RS-60 somewhere that is not right above it.

Analog, NMEA 2000, Modbus RTU or LIN?

That depends on what shows the level. A gauge on the dashboard or an analogue input: Analog. A chart plotter or multifunction display: NMEA 2000. A PLC, gateway or monitoring system: Modbus RTU. The panel of a camper or vehicle with a LIN bus: LIN (bit rate and frame ID are set in the app).

Can my tank gauge stay?

Yes, with the Analog version. It speaks both resistance standards, EU 10–180 Ω and US 240–33 Ω, and also gives 0–5 V or 0–10 V. You choose in the app.

How does the level get onto my plotter?

Through NMEA 2000: the sensor sends the standard fluid level message (PGN 127505). In the app you set the fluid type and the tank instance; on some plotters you then add the tank to a page yourself.

Once it is on

Do I need the app every day?

No. The app is for setting up, firmware updates and having a look over Bluetooth when you are nearby. The sensor measures and sends on its own, also with your phone switched off.

What is the green LED telling me?

A short blink about every 2 seconds: all is well, it is measuring. A long blink: something is wrong, and the app shows what.

Waves, filling up, a cold night?

Sloshing is smoothed out, so the level stays calm under way. Thick foam, for example right after filling, can disturb the reading until it settles. Condensation inside the tank usually makes no difference.

Does it wear out?

There is nothing to wear: no moving parts and no contact with the liquid. Now and then, check that it still sits firmly and that the cable is undamaged. It comes with a 3-year warranty.

Not in the list? Ask us →

Interested in the RS-60?

For more information, get in touch. We design and build in Groningen.