Nederlandse versie

2-WIRE DIMMER SWITCH

2-wire dimmer switch

 
Introduction:

The dimmer is designed as a built in wall fixture. The 2-wire dimmer is suitable for 12 or 24 V DC light bulbs and halogen lighting.

A soft-start feature ensures a long lifetime for the lights. The light is off when the dimmer is set to ‘fully dimmed’ and the current consumed by the dimmer is then only about 1 mA (this is significantly less than the self-discharge of the battery).

Installation:

Dimmer switch zk

Dimmer switch

The dimmer can be connected in the same way as a switch and can therefore replace the switch in an existing installation. The dimmer can be attached to the plus or minus power line. A build-in box can be used if required (make: Berker, type B.MOBIL). Note that if the dimmer is connected wrongly the light will shine continuously.

  

Switch Operation:

Switch pressed briefly: lighting is switched on to the most recently set light intensity or the light is switched off.

Switch held in: adjust the light strength.

2-wire dimmer switch2-wire dimmer switch